Visionis FPC-5111 Heavy Duty 600lbs Electromagnetic Lock - IP68 Waterproof Outdoor Access Control System with VIS-3000 Keypad/Reader (2000 Users) - Ideal for Commercial Buildings, Schools & Secure Facilities

Welcome To Visionis The 5111 kit is a two door 600lbs Maglock Access Control Kit for doors that open out. This system is mainly used to give access to a certain room, office or building (depending on your application) to certain people. This keypad will allow up to 2000 users through either of the four access options. Proximity cards and/or keytags are NOT INCLUDED. The keypad is the only outdoor component. The magnetic lock and all other products for installation are indoor. On the keypad, you will notice a doorbell towards the bottom. This will allow people from the outside to ring the doorbell and notify those inside that there is someone wanting to come in. Once someone has entered a programmed code, card, tag, or NFC equipped phone, the maglock will disengage and allow for entrance. The lock will then engage again and remain closed until it is unlocked by one of the four access options. This magnetic lock system also brings an exit button that will allow you to exit from the inside of the door. Keep in mind that this exit button does not bring a delay meaning that you would have to press the exit button at the same time that you open the door. Before purchasing, it is recommended that the customer checks with their local fire authority to see if there is any additional product they may need in order to comply with the local fire codes. We are not responsible for the improper installation of our product(s) or any type of fees that can be incurred by not complying with your local fire authority. We recommend that at the time of install, you set everything up on a work bench to make sure everything is ready to go before. These products and their user-friendly design will have you secured and protected very soon! Get Secured A diverse keypad in its functionality, the VIS-3000 provides access through four different options. You can enter a pin code onto the keypad, use a proximity card, proximity key tag, or mobile phone that has built-in NFC (not compatible with IOS). Since this is a standalone system, meaning that there is no software, it is recommended for you to keep a record of all personnel and their assigned user ID with key code, key card, key tag, or mobile phone. Ultra-low power consumption: Standby current is less than 30mA.Input & Output: Wiegand26.Searching Time: Less than 0.1s after reading card.Backlight Keypad: Easy to operate at night.Doorbell interface: Support external wired doorbell.Access ways: Card, code, card+code.Independent codes: Use codes without related card.Change Codes: Users can change codes by themselves.Anti-tamper alarm: Alarm is activated after tear down illegally.Delete Users by card NO.: Delete card NO. by keypad to eliminate security risk completely.Waterproof Rate: IP68, indoor or outdoor use. Security Built for You The VISML600LED magnetic door lock provides a strong sense of security with its outstanding holding force and significant features. The maglock is installed beneath the top of the door frame to make sure that the door remains closed and locked. With the VISML600LED, you have up to 600lbs of force protecting the door, which means it would take above 600lbs of force to open the door if someone wanted to force entry into the door. The LED light on the maglock helps you identify when the maglock is locked and unlocked. When the light is red, the maglock is locked. When the light is green, the maglock is unlocked. Hall Effect Contact: SPDT rated 2A at 24 VDCMagnetic Contact Rating: 28 VDC, 0.5A, 10WAnti-Rust Surface Treatment: Blue Zinc PlatingOperating Temperature: 0~55° C (32~131° F)Weight (Magnet): 1.1 kg (±1%)Dimensions: Magnet – (L)250x(W)42x(T)25 mm Armature – (L)180x(W)38x(T)11 mmGreen/Red LED Indication for EM Lock Status Know The Details Input Voltage: DC 12V. Idle Current: ≤25mACard Frequency: 125KHz for EM // 13.56MHz for MifareKeypad Transmission Format: 4bit, 8bit and Virtual card numberProtection Level: IP68 Stainless-steel face-plate“PUSH TO EXIT” & “PRESIONE PARA SALIR” inserts includedFits into standard single-gang box.Degree of Protection: IP-40. LED: YesSwitch Plate Material: Stainless Steel Voltage Input: 12 VDC / 24 VDCCurrent Draw: 12V / 500mA ; 24V / 250mA (±5%)Holding Force: Up to 600 lbs (272 kg)